Customizing Soft Keys - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Customizing Soft Keys

Using the configuration file, you can select which soft keys can appear on the Idle screen,
the Active Call screen, the Held Call screen, and the Live Dial screen. You can also specify
the position of each soft key. See
Some soft keys appear only under certain conditions. For example, the Line soft key on the
Idle screen appears only if there is more than one registered SIP account. When a
"conditional" soft key is not visible, the soft key's position is left empty.
Soft key levels with no soft keys will not be shown if there are multiple soft key levels (as
indicated by the  and  icons). Any soft key level where all soft keys are invisible will be
dynamically skipped when the user navigates through the available levels. On the VSP736,
a soft key level consists of four soft keys (populated or blank) in a row.
Table 4 shows the soft key options available for each screen. Each screen can have a
maximum of 12 soft keys.
You cannot edit soft key text. The configuration file parameters allow you to only
select and position the soft keys for each screen.
Table 4. Custom Soft Keys
Screen
Idle
Introducing the VSP736
VSP736 Administrator and Provisioning Manual
"softkey Module: Custom Soft Key Settings" on page
Available Soft Keys
Blank
Directory
Call Log
Redial
Messages
Do Not Disturb
Call Forward
Call Forward All
Call Forward No Answer
Call Forward Busy
Intercom
Retrieve Parked Call
Call Return
Group Call Pickup
Direct Call Pickup
Line (visible with more than one account assigned)
21
213.
Soft Key Text
Directory
Call Log
Redial
Message
DND
CallFwd
FwdAll
CFNA
FwdBusy
Intercom
Retrieve
CallBack
GrpPickup
DirPickup
Line
Back to Contents