Softkey Module: Custom Soft Key Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

softkey Module: Custom Soft Key Settings

The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen, the Live Dial screen and the Transfer
Setup screen. You can also specify the position of each soft key. Softkeys appear on the
VSP736 screen in the same order as the softkey values you enter. Enter soft key values
separated by commas. For more information, see
can specify a maximum of 12 soft keys (three levels) for each parameter.
The soft key settings follow the format softkey.[element].
All the soft key settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP736 Administrator and Provisioning Manual
softkey.idle
Specifies the soft keys visible on the idle screen.
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings
softkey.call_active
Specifies the soft keys visible on the active call screen.
blank, new, park_call, end,
hold, pri_hold, transfer,
conf, flash,hs_pick,record
softkey.call_held
Specifies the soft keys visible on the held call screen.
blank, new, retrieve,
grp_pickup, dir_pickup,
end, resume, transfer, conf,
hs_pick
softkey.live_dial
Specifies the soft keys visible on the live dial screen.
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
213
"Customizing Soft Keys" on page
Default: line,cfwd,dir,settings
Default: end,hold,transfer,conf,
record,hs_pick
Default: end,new,resume,transfer,
conf,hs_pick
Default: cancel,backspc,input,dial,
redial
21. You
Back to Contents