Voice; Feature Access Codes Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Voice

Setting
Min Local RTP port
Max Local RTP port

Feature Access Codes Settings

If your IP PBX service provider uses feature access codes, then enter the applicable codes
here. You can assign many of these features to programmable feature keys, which enables
end users to press the keys to dial out the codes you enter here. To configure
programmable feature keys, see
Setting
Paging
Call Park
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Enter the lower limit of the Real-time Transport Protocol (RTP)
port range. RTP ports specify the minimum and maximum port
values that the phone will use for RTP packets.
Enter the upper limit of the RTP port range.
"Programmable Feature Keys" on page
Description
Enter the paging access code.
Enter the call park access code. Broadsoft
provides a feature access code for the park
feature. Asterisk/Metaswitch provides a
parking lot extension number for the park
feature. Enter the parking lot extension
number here.
58
69.
Assignable
to PFK?
Yes
Yes
Back to Contents