EnGenius EWS Series User Manual page 96

Class 2: The maximum power level at the Power Sourcing Equipment is 7.0 Watts.
Class 3: The maximum power level at the Power Sourcing Equipment is 15.4 Watts.
Class 4: The maximum power level at the Power Sourcing Equipment is 30 Watts.
Class (User Select this option to base the power limit on the value configured in the User
Defined) Power Limit field.
User Power Set the maximum amount of power that can be delivered by a port.
Limit
Note: The User Power Limit can only be implemented when the Class value is set to
User-Defined.
Status Shows the port's PoE status. The possible field values are:
Delivering Power: The device is enabled to deliver power via the port.
Disabled: The device is disabled for delivering power via the port.
Test Fail: The powered device test has failed. For example, a port could not be
enabled and cannot be used to deliver power to the powered device.
Testing: The powered device is being tested. For example, a powered device is
tested to confirm it is receiving power from the power supply.
Searching: The device is currently searching for a powered device. Searching is the
default PoE operational status.
Fault: The device has detected a fault on the powered device when the port is
forced on. For example, the power supply voltage is out of range, a short occurs, a
communication or there is a communication error with PoE devices, or an unknown
error occurs.
Click Apply to save settings.
96