EnGenius EWS Series User Manual page 68

AP Info
AP Information: Select to toggle on/off AP detailed information to be shown on your floor plan.
2.4GHz / 5GHz: Select whether to display signal coverage of 2.4GHz or 5GHz radio. The wireless coverage
displayed will be based on the transmit power settings of the Access Point.
Scaling Tool: Use the scaling tool to determine the exact distance on the floorplan.
Signal Indicator: The colored indicator displays the reference signal strength covered.
RF Coverage
Enable: Select to display wireless coverage on your floor plan.
RSSI Value: Adjust RSSI value to emulate using the slider bar.
Calibration Offset: Use the slider bar to adjust the offset value based on the deployment.
RSSI Range Simulate: Check the RSSI Simulate box to display RSSI reference on your floor plan. Adjust
RSSI coverage range to emulate using the slider bar.
68