EnGenius EWS Series User Manual page 173

Port
Mode
Re-Authentication
Re-authentication
period
Quiet Period
Supplicant Period
Max Retry
Guest VLAN ID
Click Apply to update the system settings.
Displays the ports for which the 802.1X information is displayed.
Select Auto or Force_UnAuthorized or Force_Authorized mode from the
list.
Select whether port re-authentication is Enabled or Disabled.
Enter the time span in which the selected port is re-authenticated. The
default is 3600 seconds.
Enter the number of the device that remains in the quiet state following a
failed authentication exchange. The default is 60 seconds.
Enter the amount of time that lapses before an EAP request is resent to
the supplicant. The default is 30 seconds.
Enter the maximum number of times that the Switch retransmits an EAP
request to the client before it times out the authentication session. The
default is 2 times.
Select whether guest VLAN ID is Enabled or Disabled.
173