EnGenius EWS Series User Manual page 119

State
Transmission Interval
Holdtime Multiplier
Reinitialization Delay
Transmit Delay
Local Device
LLDP devices must support chassis and port ID advertisement, as well as the system name, system ID,
system description, and system capability advertisements. Here, you can view detailed LLDP information
for the Switch.
Chassis ID Subtype
Chassis ID
System Name
System Description
Select Enabled or Disabled to activate LLDP for the Switch.
Enter the interval at which LLDP advertisement updates are sent. The
default value is 30. The range is from 5 to 32768.
Enter the amount of time that LLDP packets are held before packets are
discarded and measured in multiples of the Advertised Interval. The
default is 4. The range is from 2 to 10.
Enter the amount of time of delay before reinitializing LLDP. The default is
2. The range is from 1 to 10.
Enter the amount of time that passes between successive LLDP frame
transmissions. The default is 2 seconds. The range is from 1 to 8191
seconds.
Displays the chassis ID type.
Displays the chassis ID of the device transmitting the LLDP frame.
Displays the administratively assigned device name.
Describes the device.
119