EnGenius EWS Series User Manual page 21

Auto-Configuration
IP Address
Subnet Mask
Default Gateway
Primary DNS Server
Secondary DNS Server
4. Click Apply and the Access Point(s) you've configured will be moved to the Managed list. Note that
the status of the AP will change from Connecting to Provisioning to Online. Once the status turns
Online, your Access Point(s) have been successfully added to the Managed list.
Note: If the status shows Incompatible Version, please check and make sure that the firmware of the
Access Point and Switch are compatible.
DHCP: You can choose to auto assign IP address if there is a
DHCP server in the network.
Static: If you wish to manually assign the IP address, choose
Static. Enter the IP address you wish to assign to the AP and fill
in the subnet mask, default gateway and DNS server address.
Keep AP's Settings: Select this option for the AP to use its
current network settings.
Enter the IP address for the Access Point.
Enter the subnet mask for the Access Point.
Enter the default gateway for the Access Point.
Enter the primary DNS server name.
Enter the secondary DNS server name (if necessary).
21