Ipv4 Ace - EnGenius EWS Series User Manual

IPv4 ACE

Use this page to view and add rules to IPv4-based ACLs.
ACL Name Select the ACL from the list for which a rule is being created.
Sequence Enter the sequence number which signifies the order of the specified ACL relative to
other ACLs assigned to the selected interface. The valid range is from 1 to
2147483647, 1 being processed first.
Action Select what action to take if a packet matches the criteria.
Permit: Forwards packets that meet the ACL criteria.
Deny: Drops packets that meet the ACL criteria.
Protocol Select Any, Protocol ID, or Select from a List in the drop down menu.
Any: Check Any to use any protocol.
Protocol ID: Enter the protocol in the ACE to which the packet is matched.
Select from List: Selects the protocol from the list in the provided field.
•
ICMP: Internet Control Message Protocol (ICMP). The ICMP enables the gateway
or destination host to communicate with the source host.
•
IPinIP: IP in IP encapsulates IP packets to create tunnels between two routers.
This ensures that IP in IP tunnel appears as a single interface, rather than several
separate interfaces.
•
TCP: Transmission Control Protocol (TCP). Enables two hosts to communicate
and exchange data streams. TCP guarantees packet delivery, and guarantees
that packets are transmitted and received in the order they are sent. EGP
Exterior Gateway Protocol (EGP). Permits exchanging routing information
between two neighboring gateway hosts in an autonomous systems network.
•
IGP: Interior Gateway Protocol (IGP). Enables a routing information exchange
between gateways within an autonomous network.
•
UDP: User Datagram Protocol (UDP). UDP is a communication protocol that
157