System Log - EnGenius EWS Series User Manual

System Log

Global Settings
From here, you can Enable or Disable the Log settings for the EWS Switch.
Local Logging
The System Log is designed to monitor the operation of the EWS Switch by recording the event messages
it generates during normal operation. These events may provide vital information about system activity
that can help in the identification and solutions of system problems.
The EWS Switch supports log output to two directions: Flash and RAM. The information stored in the
system's RAM log will be lost after the Switch is rebooted or powered off, whereas the information
stored in the system's Flash will be kept effective even if the Switch is rebooted or powered off. The log
has a fixed capacity; at a certain level, the EWS Switch will start deleting the oldest entries to make room
for the newest.
51