Access Control - EnGenius EWS Series User Manual

Access Control

This page displays the list of wireless clients previously blocked from your network. If for any reason, you
need to block a client device from your network, you can do so from this page by creating a new rule and
entering the client's MAC address.
Blocking a Specific Client Device
Follow the steps below to permanently block a specific client device from the network.
Click the Add button to create a new block rule.
1.
Enter the MAC Address and Description of the wireless client device you wish to block.
2.
Click on Apply to create a new rule.
3.
Click on the Apply button on the upper right to save settings made on this page.
4.
Unblocking a Previously Blocked Client Device
Click on the Delete button on the client device you wish to unblock.
1.
Click on the Apply button on the upper right to save settings made on this page.
2.
44