Community List - EnGenius EWS Series User Manual

Community List

In SNMPv1 and SNMPv2c, user authentication is accomplished using types of passwords called
Community Strings, which are transmitted in clear text and not supported by authentication. It is
important to note that the community name can limit access to the SNMP agent from the SNMP
network management station, functioning as a password.
Click Add to add a community list to the Switch. Next, name the community and choose the level of
access that will be granted to the specified list from the drop down boxes.
Community Name
Community Mode
Group Name
View Name
Access Rights
Click the Apply button
Enter the name of SNMP community string.
Selected Basic or Advance from the list. Select the Advance attached to the
SNMP group.
Select the SNMP group from a list.
Select the view name from a list.
Specify the level of permission for the MIB objects accessible to the SNMP.
Your choices are Read/Write or Read-only.
to accept the changes or the Cancel button to discard them.
148