EnGenius EWS Series User Manual page 91

To configure date/time through SNMP:
Next to the Enable SNTP, select Enable.
1.
In the Time Zone Offset list, select by country or by the GMT time zone in which the Switch is
2.
located.
Next select Disabled, Recurring, or Non-Recurring for Daylight Savings Time. Daylight saving is a
3.
period from late spring to early fall when many countries set their clocks ahead of normal local time
by one hour to give more daytime light in the evening.
In the SNTP/NTP Server Address field, enter the IP address or the host name of the SNTP/NTP server.
4.
Finally, enter the port number on the SNTP server to which SNTP requests are sent. The valid range is
5.
from 1–65535. The default is: 123.
Click Apply to update the system settings.
6.
To configure date/time manually:
Next to the Enable SNTP, select Disable.
1.
In the Manual Time field, use the drop-down boxes to manually select the date and time you wish to
2.
set.
In the Time Zone Offset list, select by country or by the Coordinated Universal Time (UTC/GMT) time
3.
zone in which the Switch is located.
Next select Disabled, Recurring or Non-recurring for Daylight Savings Time. Daylight saving is a
4.
period from late spring to early fall when many countries set their clocks ahead of normal local time
by one hour to give more daytime light in the evening.
Click Apply to update the system settings.
5.
91