Ipv6 Ace - EnGenius EWS Series User Manual

IPv6 ACE

Allows IPv6 Based Access Control Entry (ACE) to be defined within a configured ACL.
ACL Name
Sequence
Action
Protocol
Source IP Address Value
Source IP Prefix Length
Destination IP Address
Value
Destination IP Prefix
Length
Source Port
Select the ACL from the list.
Enter the sequence number which signifies the order of the specified
ACL relative to other ACLs assigned to the selected interface. The valid
range is from 1 to 2147483647, 1 being processed first.
Select what action taken if a packet matches the criteria.
Permit: Forward packets that meet the ACL criteria.
Deny: Drops packets that meet the ACL criteria.
Select the Any, Protocol ID, or Select from List from drop down menu.
Protocol ID: Enter the protocol in the ACE to which the packet is
matched.
Select from List: Select the protocol from the list in the provided field.
Enter the source IP address.
Enter the prefix length of the new source IP address. The range is from
0 to 128.
Enter the destination IP address.
Enter the prefix length of the new source IP address. The range is from
0 to 128.
Select Single or Range from the list. Enter the source port that is
160