EnGenius EWS Series User Manual page 62

Left click on the Access Point to bring up a menu where you can configure AP settings, remove AP from
management list, reboot AP, redirect to the Active Clients page or redirect to troubleshooting page.
You can search for an Access Point using the IP Address or MAC address.
Click on to show or hide port information on the Controller.
Click on for the Controller to save the current network topology. Changes will be displayed
upon detecting a topology change.
Note: The EWS Switch can only generate topologies with EnGenius L2 Series switches. Non-EnGenius
switches will be marked as "Uncontrollable LAN Switches" in the generated topology.
62