EnGenius EWS Series User Manual page 114

MST ID Displays the ID of the MST group that is created. A maximum of 15 groups
can be set for the Switch.
Port Displays port or trunked port ID.
Priority Select the bridge priority value for the MST. When switches or bridges are
running STP, each is assigned a priority. After exchanging BPDUs, the Switch
with the lowest priority value becomes the root bridge. The bridge priority is
a multiple of 4096. If you specify a priority that is not a multiple of 4096, the
priority is automatically set to the next lowest priority that is a multiple of
4096. For example, if you set the priority to any value from 0 through 4095,
the priority is set to 0. The default priority is: 32768. The valid range is from
0 to 61440.
Internal Path Cost The Internal Path Cost setting allows you to specify the relative cost of
Conf sending spanning tree traffic through the interface to adjacent bridges within
a spanning tree region.
Internal Path Cost Displays the operation cost of the path from this bridge to the root bridge.
Oper
114