System Time - EnGenius EWS Series User Manual

System Time

Use the System Time screen to view and adjust date and time settings.
The Switch supports Simple Network Time Protocol (SNTP). SNTP assures accurate network device clock
time synchronization up to the millisecond. Time synchronization is performed by a network SNTP server.
This switch operates only as an SNTP client and cannot provide time services to other systems.
Current time
Enable SNTP
Time Zone
Daylight Savings Time
Daylight Savings Time Offset
Recurring From
Recurring To
SNTP/NTP Server Address
Server Port
Displays the current system time.
Select whether to enable or disable system time synchronization
with an SNTP server.
Configure the time zone setting either by setting GMT difference
or by country.
Select from Disabled, Recurring or Non-recurring.
Enter the time of Daylight Savings Time Offset.
Select the Day, Week, Month, and Hour from the list.
Select the Day, Week, Month, and Hour from the list.
Enter the IP address or hostname of the SNTP/NTP server.
Enter the server port of the SNTP/NTP server.
90