EnGenius EWS Series User Manual page 26

Remove AP
The Remove button removes selected Access Point(s) from list. Access Points removed will be
automatically set to standalone mode with all settings restored to their factory default settings.
Reboot AP
The Reboot button will reboot the selected Access Point(s).
Search Bar
Use the Search Bar to search for Access Points managed by the EWS Switch using the following criteria:
Status, model name, MAC Address, Device name, IP address, Firmware Version, Cluster.
Status
This indicates the current status of the managed Access Point.
Status Explanation
Online AP is connected and managed by EWS Switch.
Provisioning AP is currently in the process of connecting to the EWS Switch.
Applying Change AP is currently applying system changes.
Connecting AP is currently connecting to EWS Switch.
Offline AP is currently offline.
26