Local Logging - EnGenius EWS Series User Manual

Local Logging

The System Log is designed to monitor the operation of the Switch by recording the event messages it
generates during normal operation. These events may provide vital information about system activity
that can help in the identification and solutions of system problems.
The Switch supports log output to two directions: Flash and RAM. The information stored in the system's
RAM log will be lost after the Switch is rebooted or powered off, whereas the information stored in the
system's Flash will be kept effective even if the Switch is rebooted or powered off. The log has a fixed
capacity; at a certain level, the EWS Switch will start deleting the oldest entries to make room for the
newest.
Click the Apply button to accept the changes or the Cancel button to discard them.
192