EnGenius EWS Series User Manual page 149

User List
Use the User List page to create SNMP users for authentication with managers using SNMP v3 to
associate them to SNMP groups. Click Add to add a new user.
Privilege Mode
Authentication
Protocol
Authentication
Password
Encryption Protocol
Encryption Key
Click the Apply button
Select No Auth, Auth, or Priv security level from the list.
No auth: Neither authentication nor the privacy security levels are
assigned to the group.
Auth: Authenticates and ensures that the origin of the SNMP message is
authenticated.
Priv: Encrypts SNMP messages.
Select the method used to authenticate users.
MD5: Using the HMAC-MD5 algorithm.
SHA: Using the HMAC-SHA-96 authentication level. Enter the SHA
password and the HMAC-SHA-96 password to be used for authentication.
Enter MD5 password and the HMAC-MD5-96 password to be used for
authentication.
Select the method used to authenticate users.
None: No user authentication is used.
DES: Using the Data Encryption Standard algorithm.
Enter the Data Encryption Standard key.
to accept the changes or the Cancel button to discard them.
149