Destination Port
TCP Flags
Type of Service
Click Apply to update the system settings.
matched to packets. The range is from 0 to 65535.
Select Single or Range from the list. Enter the destination port that is
matched to packets. The range is from 0 to 65535.
Select whether to handle each six TCP control flags; URG (Urgent), ACK
(Acknowledgment), PSH (Push), RST (Reset), SYN (Synchronize), and
FIN (Fin) from drop down menu.
Don't Care: The ACE do not treat the TCP control flag.
Set: The packet with the TCP control flag being set matches the
criteria.
Unset: The packet with the TCP control flag being unset matches the
criteria.
Select Any or DSCP to match from drop down list. When DSCP to
match is selected, enter the DSCP. The range is from 0 to 63.
161