EnGenius EWS Series User Manual page 89

IPv6 State
Auto Configuration
DHCPv6 Client
Static
IPv6 Address
Gateway
Click Apply to save settings.
Select whether you wish to enable Auto Configuration, DHCPv6 Client, or
Static for the IPv6 address.
Use this option to set the IPv6 address for the IPv6 network interface in
Auto Configuration. The Switch will automatically generate and use a
globally-unique IPv6 address based on the network prefix and its Ethernet
MAC address.
This enables the IP address to be configured automatically by the DHCP
server. Select this option if you have an IPv6 DHCP server that can assign
the Switch an IPv6 address/prefix and a default gateway IP address.
Allows the entry of an IPv6 address/prefix and a default gateway for the
Switch. Select this option if you wish to assign static IPv6 address
information to the Switch.
This field allows the entry of an IPv6 address/prefix to be assigned to this IP
interface.
Set the default gateway IPv6 address for the interface. Enter the default
gateway IPv6 address.
89