EnGenius EWS Series User Manual page 147
Gigabit managed smart switch with wireless controller
Hide thumbs
Also See for EWS Series:
- User manual (74 pages) ,
- User manual (207 pages) ,
- User manual (65 pages)
Table of Contents
Advertisement
Group List
Configure SNMP Groups to control network access on the Switch by providing users in various groups
with different management rights via the Read View, Write View, and Notify View options.
Group Name
Enter the group name that access control rules are applied to. The group name
can contain up to 30 alphanumeric characters.
Security Mode
Selects the SNMP version (v1, v2c, v3) associated with the group.
Security Level
Select the security level for the group. Security levels apply to SNMPv3 only.
No Auth: Neither authentication nor the privacy security levels are assigned to
the group.
Auth: Authenticates SNMP messages.
Priv: Encrypts SNMP messages.
Read View
Management access is restricted to read-only.
Write View
Select a SNMP to allow SNMP write privileges to the Switch's SNMP agent.
Notify View
Select a SNMP group to receive SNMP trap messages generated by the Switch's
SNMP agent.
Click the Apply button
to accept the changes or the Cancel button
to discard them.
147
Advertisement
Table of Contents
