Voice Vlan - EnGenius EWS Series User Manual

Voice VLAN

Enhance your Voice over IP (VoIP) service by configuring ports to carry IP voice traffic from IP phones on
a specific VLAN. Voice VLAN provides QoS to VoIP, ensuring that the quality of the call does not
deteriorate if the IP traffic is received erratically or unevenly.
Global Settings
Voice VLAN State
Voice VLAN ID
802.1p Remark
Remark
CoS/802.1p
Aging Time
Click Apply to update the system settings.
Select Enabled or Disabled for Voice VLAN on the Switch.
Sets the Voice VLAN ID for the network. Only one Voice VLAN is supported on
the Switch.
Enable this function to have outgoing voice traffic to be marked with the
selected CoS value.
Defines a service priority for traffic on the Voice VLAN. The priority of any
received VoIP packet is overwritten with the new priority when the Voice
VLAN feature is active on a port. (Range: 0 to 7; Default: 6)
The aging time is used to remove a port from voice VLAN if the port is an
automatic VLAN member. When the last voice device stops sending traffic and
the MAC address of this voice device is aged out, the voice VLAN aging timer
will be started. The port will be removed from the voice VLAN after expiration
of the voice VLAN aging timer. If the voice traffic resumes during the aging
time, the aging timer will be reset and stop. The range for aging time is from 1
to 65535 minutes. The default is 1440 minutes.
137