Port Settings
From here, you can configure the QoS port settings for the Switch. Select a port you wish to set and
choose a CoS value from the drop down box. Next, Select to enable or disable the Trust setting to let any
CoS packet be marked at ingress.
Click Apply to update the system settings.
Port
Displays the ports for which the CoS parameters
are defined.
CoS Value
Select the CoS priority tag values, where 0 is the
lowest and 7 is the highest.
Trust
Select Enabled to trust any CoS packet marking at
ingress. Select Disabled to not trust any CoS packet
marking at ingress.
167