EnGenius EWS Series User Manual page 123

Global Settings
Click to enable or disable the IGMP Snooping feature for the Switch. Next, select whether you wish to
use V2 or V3. Finally, select whether you wish to enable or disable the Report Suppression feature for
the Switch.
Status
Version
Report
Suppression
Click Apply to update the system settings.
Select to enable or disable IGMP Snooping on the Switch. The Switch snoops
all IGMP packets it receives to determine which segments should receive
packets directed to the group address when enabled. The default setting is:
Disabled.
Select the IGMP version you wish to use. If an IGMP packet received by the
interface has a version higher than the specified version, this packet will be
dropped.
Select whether Report Suppression is Enabled or Disabled for IGMP
Snooping. The Report Suppression feature limits the amount of membership
reports the member sends to multicast capable routers.
123