EnGenius EWS Series User Manual page 95

PoE Port Settings
Port Displays the specific port for which PoE parameters are defined. PoE parameters
are assigned to the powered device that is connected to the selected port.
State Displays the active participating members of the trunk group.
Member Enable: Enables the Device Discovery protocol and provides power to the device
Port using the PoE module. The Device Discovery protocol lets the device discover
powered devices attached to device interfaces and learns their classification.
Disable: Disables the Device Discovery protocol and halts the power supply
delivering power to the device using the PoE module.
Priority Select the port priority if the power supply is low. The field default is Low. For
example, if the power supply is running at 99% usage, and port 1 is prioritized as
high, but port 6 is prioritized as low, port 1 is prioritized to receive power and port
6 may be denied power.
Low: Sets the PoE priority level as low.
Medium: Sets the PoE priority level as medium.
High: Sets the PoE priority level as high.
Critical: Sets the PoE priority level as critical.
Class (Auto) Shows the classification of the powered device. The class defines the maximum
power that can be provided to the powered device. The possible field values are:
Class 0: The maximum power level at the Power Sourcing Equipment is 15.4 Watts.
Class 1: The maximum power level at the Power Sourcing Equipment is 4.0 Watts.
95