Storm Control
Storm Control limits the amount of Broadcast, Unknown Multicast, and Unknown Unicast frames
accepted and forwarded by the Switch. Storm Control can be enabled per port by defining the packet
type and the rate that the packets are transmitted at. The Switch measures the incoming Broadcast,
Unknown Multicast, and Unknown Unicast frames rates separately on each port, and discards the frames
when the rate exceeds a user-defined rate.
Port
Status
Broadcast
Displays the ports for which the Storm Control information is displayed.
Select whether Storm Control is Enabled or Disabled ingress on the
interface.
Enter the broadcast rate in kilobits per second. The Gigabit Ethernet ports
have a maximum speed of 1000000 kilobits per second. If the rate of
broadcast traffic ingress on the interface increases beyond the configured
threshold, the traffic is dropped.
169