Access - EnGenius EWS Series User Manual

Access

HTTP(S) Settings
The EnGenius Switch provides a built-in browser interface that enables you to configure and manage the
Switch via Hypertext Transfer Protocol (HTTP) and Hypertext Transfer Protocol Secure (HTTPS) requests
selectively to help prevent security breaches on the network. You can manage your HTTP and HTTPS
settings for the Switch further by choosing the length of session timeouts for HTTP and HTTPS requests.
Select whether to enable or disable the HTTP service and enter the HTTP Timeout session. Next, select
whether to enable or disable the HTTPS service and enter the HTTPS timeout session for the Switch.
HTTP Service
HTTP Session Timeout
HTTPS Service
HTTPS Session Timeout
Click Apply to update the system settings.
Select whether HTTP service for the Switch is Enabled or Disabled. This
is enabled by default.
Enter the amount of time that elapses before HTTP is timed out. The
default is 5 minutes. The range is from 0 to 86400 minutes.
Select whether the HTTP service is Enabled or Disabled. This is disabled
by default.
Enter the amount of time that elapses before HTTPS is timed out. The
default is 5 minutes. The range is from 0 to 86400 minutes.
176