EnGenius EWS Series User Manual page 158

Source IP Enter the source IP address.
Address Value
Source IP Mask Enter the mask of the new source IP address.
Destination IP Enter the destination IP address.
Address Value
Destination IP Enter the mask of the new source IP address.
Mask
Type of Service Select Any or DSCP to match from drop down list. When DSCP to match is selected,
enter the DSCP. The range is from 0 to 63.
ICMP Type Select Any, Protocol ID, or Select from List from drop down menu.
Protocol ID: Enter the protocol in the ACE to which the packet is matched. The range
is from 0 to 255.
Select from List: Select the ICMP from the list in the provided field.
ICMP Code Select Any or User Defined from drop down menu. When User Defined is selected,
enter the ICMP code value. The range is from 0 to 255.
Click Apply to update the system settings.
transmits packets but does not guarantee their delivery.
•
HMP: The Host Mapping Protocol (HMP) collects network information from
various networks hosts. HMP monitors hosts spread over the Internet as well as
hosts in a single network.
•
RDP: Reliable Data Protocol (RDP). Provides a reliable data transport service for
packet-based applications.
•
IPv6: Matches the packet to the IPV6 protocol.
•
IPv6: Rout: Routing Header for IPv6.
•
IPv6: Frag: Fragment Header for IPv6.
•
RVSP: Matches the packet to the ReSerVation Protocol(RSVP).
•
IPv6: ICMP: The Internet Control Message Protocol (ICMP) allows the gateway
or destination host to communicate with the source host.
•
OSPF: The Open Shortest Path First (OSPF) protocol is a link-state hierarchical
interior gateway protocol (IGP) for network routing Layer Two (2) Tunneling
Protocols. It is an extension to the PPP protocol
•
that enables ISPs to operate Virtual Private Networks (VPNs).
•
PIM: Matches the packet to Protocol Independent Multicast (PIM).
•
L2TP: Matches the packet to Internet Protocol (L2IP).
158