Trace Route - EnGenius EWS Series User Manual

Trace Route

The traceroute feature is used to discover the routes that packets take when traveling to their
destination. It will list all the routers it passes through until it reaches its destination, or fails to reach the
destination and is discarded. In testing, it will tell you how long each hop from router to router takes via
the trip time of the packets it sends and receives from each successive host in the route.
IP Address Enter the IP address or the host name of the station you wish the Switch to ping to.
Max Hop Enter the maximum number of hops. The range is from 2 to 255 and the default is
30.
Result Displays the trace route results.
Click Test to initiate the trace route.
198