Install and configure CS 1000 Release 5.0
The MCC 3100 for BlackBerry/Nokia depends on the following CS 1000
R5.0 components:
•
•
•
Install and configure the MCG 3100
For more information, see Nortel Mobile Communication Gateway 3100 —
Installation (NN42030-300)
Add Dynamic Gateway Endpoint on the Linux Based NRS for the
MCG 3100
For more information, see
(page
Add PCAs for each MCC 3100 for BlackBerry/Nokia user
For more information, see
Add User Endpoint for the MCC 3100 for BlackBerry/Nokia user on the
Linux based NRS
For more information, see
(page
Configure the dial plan to support calls from the MCC 3100 (Service DN
calls) as well as calls to MCG 3100 using the PCA
For more information, see
Configure trunking parameters required to support calls to and from the
MCC 3100 for BlackBerry/Nokia
For more information see
You must configure the CS 1000 SIP trunk that receives MCG 3100 calls,
on behalf of MCC 3100 for BlackBerry/Nokia users, to ESN5. You must
configure all associated Virtual trunks to WNK/WNK. These settings are
Copyright © 2007, Nortel Networks
.
Call Server
Each user requires 1 PCA to support extending calls from the CS 1000
call server to the MCG 3100 (and ultimately the MCC 3100 for
BlackBerry/Nokia).
SIP Gateway
The SIP GW runs on the VxWorks Signaling Server platform.
SIP Proxy Server
The MCG 3100 requires the use of the NRS SIP Proxy Server (only
available on the Linux based NRS).
82).
82).
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 — Administration
NN42030-600 01.04 Standard
Release 2.0 14 November 2007
MCC 3100 for BlackBerry/Nokia 21
"Enterprise Communication Server configuration"
"PCA configuration" (page
"Enterprise Communication Server configuration"
"Dial plan configuration" (page
"Dial plan configuration" (page
81).
78).
78).