Configuring a 2370, 2360, or
2380 Switch for Basic Service
Note.
Use this chapter for setting up a 2370, 2360, or 2380. To set up a 2350, see
Chapter , "Configuring a 2350 Switch for a Branch Office," on page
basic setup instead of using this chapter, see the Nortel WLAN 2300 System Software
Quick Start Guide or
Accessing the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
If your WSS does not yet have an IP address and you are accessing the CLI through the serial console port, go first to
"Accessing the CLI" on page
Note.
This chapter shows CLI command syntax and examples and includes complex
terminology. For syntax descriptions, additional configuration, and a glossary of terms, see
the Nortel Mobility System Software Command Reference and the Nortel Mobility System
Software Configuration Guide.
WLAN-Security Switch 2300 Series Installation and Basic Configuration Guide
"WSS Setup Methods" on page
80.
125. To quickly perform
57.
79