Konica Minolta bizhub pro 1050 User Manual page 348

7.
Specify the cover trimming setting.
Touch On to trim the cover, or No to deactivate this function.
If the trimming width estimated by the machine does not fall within the range
from 3 to 40 mm, a message will be displayed to inform you that the trimming
mode is unavailable.
In this case, adjust the cover or spine width to enable this setting.
8.
Make fine adjustments for the lead edge, trimming width, and
image position of the cover.
Touch Fine Adjustment to display the Fine Adjustment Screen.
To adjust the lead edge of the cover, touch Cover Lead Edge Adj.
Use +5– to select positive/negative, then use the screen keypad, arrow
keys ▲ and ▼, or the control panel keypad to enter the desired value.
To adjust the trimming width, touch Cover Trimming Adj.
Use +5– to select positive/negative, then use the screen keypad, arrow
keys ▲ and ▼, or the control panel keypad to enter the desired value.
To adjust the image position of the cover, touch Cover Image Shift Adj.
12-52
Using Perfect Binder PB-501 (continued)