Konica Minolta bizhub pro 1050 User Manual page 252

Programming Different Settings for an Output Job (Program Job) (continued)
4.
Select the desired copy conditions.
5.
Position originals FACE UP in the document feeder or FACE DOWN
on the original glass.
If the number of document feeder originals exceeds 100, divide them into
blocks not exceeding 100 sheets and load them from the block with the first
page.
6.
Press [Start].
The paper size determined at this time will be applied to all subsequent
JOBs.
When scanning for the current JOB is completed, the popup menu will be
displayed in the Copy Screen.
7.
Touch Confirm.
The current JOB images will be stored.
To delete the images, touch Cancel.
8.
Repeat steps 4 to 7 until all JOB originals are scanned.
PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER OF
PAGINATION.
9.
Select the desired output mode and enter the print quantity from
the control panel keypad.
10.
Touch Memory Scan to exit the Memory Scan mode.
11.
Press [Start].
11-32