The Utility Menu Screen can be displayed even when the job operation is in
progress.
The counter information will be displayed on the left side of the screen.
Touching Exit will return to the previous screen.
2.
Touch Detail.
The PM count, Developer count, and Drum count will be displayed.
Touching Exit will exit the Utility mode and restore the previous screen.
The Developer count and Drum count can be selected to indicate either the
cycle count or runtime count. Contact your service representative, if desired.
3.
Print the counter list, if desired.
Touch COPY tab to display the Copy Screen.
Select the desired paper size, then press [Start].
After the Counter list is printed out, the Utility mode will be released
automatically and the previous screen will be restored.
6-6
Checking Copy Count (continued)