Loading Tabbed Sheets In Tray - Konica Minolta bizhub pro 1050 User Manual

Loading Tabbed Sheets in Tray

Tabbed sheets can be used if the tray paper size is specified as tabbed sheets in the
Tray Setting or Paper Presetting. Follow the procedure below to supply the tray with
tabbed sheets.
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
Loaded in
Tray 1 or 2
1st TAB
2nd TAB
3rd TAB
1.
Withdraw the tray.
The tray paper size should be specified as tabbed sheets.
See p. 9-40 for the details of Paper Presetting.
2.
Open the paper feed roller.
3.
Place paper on the tray.
Place paper referring to the illustration shown above.
Do not load above the limit level on the side guide plate.
The machine can be set to discharge the oddments of a set of tabbed sheets
automatically if the tabbed original count is less than the number of tabbed
sheets in a set. See the next page for detail.
4.
Move the side guide plates to the edge of the paper.
Set paper aligning it to the paper feed roller side of the tray.
Press the release lever of the front side guide plate to move the side guide
plates, and also move the rear edge guide to the edge of the paper.
4-6
Loading Paper (continued)
Loaded in
Tray 3, 4, or 5
1st TAB
2nd TAB
3rd TAB
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS