Konica Minolta bizhub pro 1050 User Manual page 254

Erasing Outside of the Original (No Image Area Erase) (continued)
DO NOT CLOSE THE DOCUMENT FEEDER.
Original size should be larger than 10mm x 10mm.
7.
Press [Start].
DETAILS: Oblique Erase and Rectangle Erase Modes
The No Image Area Erase has two modes; Rectangle erase mode and
Oblique erase mode. The copier is initially set to select either mode
appropriate for the original placed on the original glass (AUTO mode).
If desired, display the Utility Menu Screen to specify either mode and the
original density level manually so that the No Image Area Erase functions
without fail.
Having Any Problem?
This function may perform incorrectly if the lighting in the work place is directly
over the original glass. In this case, consult your service representative about
an appropriate place for installation.
11-34
Oblique erase mode
Rectangle erase mode