Konica Minolta bizhub pro 1050 User Manual page 308

Using Finisher FS-503
The Finisher FS-503 has a primary (main) tray and a secondary (sub) tray, each of
which has the following output modes.
Output to the Primary (Main) Tray
Non-sort : Non-sort mode simply means that the offset-stacker finisher modes
are not selected. Copies will be stacked upon exit without being
offset by sorted sets.
Collated : Collated mode outputs multiple copies of the original set, having
each sorted set offset by 30 mm upon exit.
Uncollated : Uncollated mode groups together multiple copies of each original
and offsets the sets by 30 mm upon exit.
Staple : Staple mode offsets and staples each sorted set.
Combined with the output modes above except staple mode, you can also choose to
output face up or face down, and output front to back or back to front.
Non-sort
12-12
Staple
2 staples
Offset by 30mm
1 oblique
staple
Example:
Make 3 copied sets
from 4 original sheets
Collated
Uncollated
Offset by 30mm