Konica Minolta bizhub pro 1050 User Manual page 75

Place cover paper faceup, with the top to be rear in the tray. When making
the book bound on the right side, the front side in the tray will be the top.
Align it to the paper feed roller side.
Do not load above the limit level, and carefully load the paper to be seated
under the paper holding lever at the air.
4.
Align the side guide plates and rear edge guide to cover paper.
Press the release knob of the front side guide plate to move the side guide
plates, and also move the rear edge guide to the edge of cover paper.
Be sure that the side guide plates and rear edge guide are securely aligned to
the paper; otherwise a paper jam may be caused.
5.
When paper is seated properly, close the paper feed roller.
6.
Push in the tray until it locks into place.
The indicator "
change to "
Do not bump the tray into the perfect binder; otherwise machine trouble may
be caused.
" on the Machine Status Screen or Copy Screen will
".
Loading Paper (continued)
4-5