Konica Minolta bizhub pro 1050 User Manual page 144

• No Image Area Erase
When copying from the original glass when the document cover is open, copies only
the image area and not the exposed area of glass, which would otherwise copy as
black.
• OHP Interleave
Copies onto transparency film and interleave blank or copied paper for each original
copied.
• Output for Machine with Finisher FS-503 Installed:
Non-Sort, Collated, Uncollated, and Staple modes using the primary (main) tray
Collated and Uncollated modes using the secondary (sub) tray
Selects an output tray and output mode on the Output Application Screen.
• Output for Machine with Large Capacity Stacker LS-501/502 Installed:
Non-Sort, Collated, and Uncollated modes using the stacker
Collated and Uncollated modes using the stacker secondary (sub) tray
Selects an output tray and output mode on the Output Application Screen.
• Output for Finisher FS-503 with Folding Unit FD-501 Installed:
Punch
Folding (Z-fold, Letter fold-in, Letter fold-out, Double parallel, Gate, Folding)
Cover sheet feeding
For details, see Section 12: Setting Output Methods.
• Output for Machine with Saddle Stitcher SD-501 Installed:
Fold & Staple, Trimming
Folding (Multi Center, Multi Letter)
For details, see Section 12: Setting Output Methods.
• Output for Machine with Perfect Binder PB-501 Installed:
Perfect Binding, Trimming
For details, see Section 12: Setting Output Methods.
• Overlay
Scans an original image and overlays it on the pages of another document. For
example, you may want to incorporate a page heading, graphic design or logo into
the pages of your document.
• Overlay Memory
Same as for "Overlay" except the overlay image is stored in memory.
• Paper Capacity
Total 9,000 sheets, including two 1,500-sheet trays (Tray 1 and 2) and three 2,000
sheet trays (Tray 3, 4, and 5).
• Power Save
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by
pressing [Power Save] on the control panel.
• Program Job
Scans documents into memory while designating different copy conditions for each
original, then prints all the documents collectively.
8-6
Features of the bizhub PRO 1050/1050e (continued)