Konica Minolta bizhub pro 1050 User Manual page 53

3.
The Wake-up Screen and Machine Status Screen with warm-up
image will be displayed.
A few seconds after the Wake-up Screen appears in the touch panel, the
Machine Status Screen with four types of warm-up image will be displayed
in succession for approx. 8.0 minutes.
You can set reserve jobs while the machine is warming up.
Touch the LCD screen to change the Machine Status Screen with warm-up
image to the screen with the job list, then check that the message "Ready to
copy reserve" is displayed in the message area.
4.
The Machine Status Screen with the Job list will be displayed.
The message on the Machine Status Screen will inform you that copying
job is now available.
Machine manager may have changed the screen to be displayed after the
machine power is on, so that a user should enter the user name and password
to operate the machine. See p. 2-25 for details.
If a key counter or copy card is required, follow the instruction on the screen.
Turning On/Off the Power Switch (continued)
2-19