Checking Feature Selections by Proof Copying
Use Proof copy to produce a sample of the copied set before making multiple copies.
This is a convenient and cost effective way of viewing the results of the copying
selections.
Specifications for Proof Copy
❒ Proof copy is available when using ADF, or when using Memory Scan mode for
multiple originals or originals to be scanned from original glass.
1.
Select the desired copy conditions on the Copy Screen, then
position originals in the ADF.
Or, use Memory Scan mode to scan all originals.
2.
Press [Proof Copy] on the control panel.
A sample copy will be output while scanning originals in the ADF.
If Memory Scan mode has been used, a sample set will be delivered
immediately.
The screen for checking the job settings will be displayed.
Touch Close. The Copy Screen will be restored.
13-2