Konica Minolta bizhub pro 1050 User Manual page 65

• Using Folding or Z-fold, the finished set can be delivered to any tray of
Finisher primary (main) tray, secondary (sub) tray, and secondary (sub) tray
on the left side of Folding unit.
• Using Letter fold-in, Letter fold-out, Double parallel, or Gate mode, the
finished set will be delivered only to the secondary (sub) tray on the left
side of the Folding unit.
• The Full load detection function on Perfect binder counts one column to be
full when the following amount is reached in order to prevent the piled sets
from collapsing.
10 ~ 30-sheet-bound set: 50 sets
31 ~ 150-sheet-bound set: 35 sets or until detected as full load
151 ~ 300-sheet-bound set: until detected as full load
Height of the folded and stapled booklet
The following table shows the standard height of folded and stapled booklet
according to the number of sheets and paper size.
Number
12"×18",
of sheets
11"×17", A3
(1 set)
(401 mm or
more)
2 ~ 5 35 mm
6~ 15 45 mm
16 ~ 30 50 mm
31 ~ 50 60 mm
Paper Information (continued)
Paper size
8.5"×14", B4, 8.5"×11"R,
8K A4R, 16KR
(301 ~ 400 (261 ~ 300
mm)
40 mm
50 mm Not specified
55 mm Not specified
65 mm Not specified
B5R
(260 mm or
less)
mm)
45 mm Not specified
Not specified
Not specified
Not specified
3-5