Konica Minolta bizhub pro 1050 User Manual page 280

Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
NOTE:
Selecting -1-, -2-, -3-, you can also specify the length of the dash (-) in the
Utility mode.
Touch Change Character to select the character size (8point, 10point,
12point or 14point) and type (Gothic or Ming). See p. 11-62 for details.
Touch Printed Page to designate whether to print the selected stamp on
the front/back cover or insertions. See p. 11-63 for details.
Touch Start Number to designate the starting number, if required. See
p. 11-61 for details.
When selecting Date/Time: Specify the date/time type, printing
position, character size and type, printed page, and date & time.
Touch to highlight the desired date, time, and printing position keys on the
screen. If fine adjustment is required, touch Fine Adjustment to display the
Fine Adjustment Setting Screen. See p. 11-61 for details.
Touch Change Character to select the character size (8point, 10point,
12point or 14point) and type (Gothic or Ming). See p. 11-62 for details.
Touch Printed Page to designate whether to print the selected stamp on
the cover only or on all pages.
Touch Date & Time to designate whether to print the present time or setting
time. See p. 11-63 for details.
5.
Touch OK.
The Stamp/Overlay Screen will be restored.
Touch to select another stamp function key to use in combination, if
desired.
6.
Touch OK on the Stamp/Overlay Selection Screen.
The Application popup menu will be restored.
7.
Touch OK on the Application popup menu.
The Copy Screen will be restored.
11-60