Konica Minolta bizhub pro 1050 User Manual page 339

Specifications for Using Perfect Binder PB-501
❒ Warm-up/Low Power/Shut-Off
The perfect binder requires longer warm-up time than that required for the
main body, while the Low Power/Shut-Off mode activates at the same time on
main body and perfect binder.
We recommend you to specify the time to activate the Low Power/Shut-Off
mode in view of the frequency to use the perfect binder.
❒ Paper tray
Body: Tray 1 to 5
Cover: Tray 1 to 5 (available for Cover Print), Cover feeding tray of Perfect
binder (unavailable for Cover Print), Upper/Lower tray of the post inserter on
Folding unit (unavailable for Cover Print)
❒ Paper size
Body: Standard sizes 8.5"x11", 5.5"x8.5", A4, B5, A5, 16K (11"x17", 8.5"x11"R,
A3, B4, A4R, 8K when using Z-Fold mode)
Wide sizes 8.5"x11"W, 5.5"x8.5"W, A4W, B5W, A5W
1
Custom sizes*
Cover: Custom size*
Length (head to foot): Same as that of body set (within +5 mm)
Width: Book width × 2 + body set's thickness (1 mm or more) + (3 mm or more
of trimming width if Trimming mode is specified)
The maximum size accommodable in each tray is as follows.
2
Tray 1 to 5* : 5.91" x 11.06" min. to 12.76" x 18.11" max.
Cover feeding tray of Perfect binder: 5.91" x 11.06" min. to 12.99" x 18.58"
max.
Upper/Lower tray of the post inserter on Folding unit: 7.17" x 11.06" min. to
12.99" x 19.02" max.
❒ Paper weight
Body: 16 ~ 24 lb Bond (*
20 ~ 24 lb Bond.)
Cover: 20 ~ 60 lb Bond (*
~ 24 lb, to 20 ~ 24 lb Bond.)
❒ Number of sheets to be bound: 10 sheets min. to 300 sheets max., or within 30
4
mm thick*
❒ Covers fed from tray 1 to 5 can be simplex- or duplex-printed, while those
loaded in the cover feeding tray of Perfect binder or the upper/lower tray of post
inserter on Folding unit cannot be printed.
❒ Cover Trimming function trims the cover by the amount automatically estimated
from the following formula, in the range from 3 mm to 40 mm in 0.1 mm
increments.
(Cover width) – (Body width × 2) – (Spine width)
If the estimated amount exceeds 10 mm, perfect binder will trim the cover
automatically whether this function is activated or not.
❒ Fine Adjustment
Cover Lead Edge Adjustment adjusts the position of front cover and body set in
widthwise direction in the range from –12.8 mm to +12.8 mm in 0.1 mm
increments.
Cover Trimming Adjustment adjusts the trimming width in the range from –5.0
mm to +5.0 mm in 0.1 mm increments.
Cover Image Shift Adjustment adjusts the position of image to be printed on
the front cover when using Cover Print mode.
❒ For specifications of the secondary (sub) tray, see p. 3-2 to p. 3-8.
Using Perfect Binder PB-501 (continued)
5.91" x 5.51" min. to 12.09" x 8.70" max.
1
3
Available weight can be specified from 16 ~ 20 lb to
3
Available weight can be specified from 16 ~ 20 lb, 20
12-43