Konica Minolta bizhub pro 1050 User Manual page 261

Repeat Automatically or Select Repeat Times (Repeat: Auto Detect/ Repeat Mode)
• APS and AMS are automatically released, and 1.000 (100%) is selected as
a magnification ratio.
• When 2 Repeat, 4 Repeat, or 8 Repeat is selected, the scanning area will
be a portion of the selected paper size equally divided according to the
selected mode.
In this case, magnification ratio will be fixed to 1.000 (100%).
• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Memory
Scan mode will function automatically.
7.
Enter the desired print quantity from the control panel keypad.
8.
Position original.
For Auto Detect mode original, open the document feeder, then position the
original FACE DOWN on the original glass.
For 2 Repeat, 4 Repeat or 8 Repeat mode original, ADF is also available.
See the illustration on p. 11-39 for details.
When Auto Detect mode is selected, No Image Area Erase functions
automatically.
DO NOT close the document feeder.
9.
Press [Start].
The Auto Detect mode may not operate properly if the lighting in the work
place is directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.
11-41