Konica Minolta bizhub pro 1050 User Manual page 363

Checking Feature Selections Before Copying (Check Mode) (continued)
Touch the desired copying condition key (Basic Setting/ Output Application/
Special Image/ Application) on the Check Screen, then touch Change
Setting.
The LCD will display an appropriate screen to change the copying condition
selected. Change the setting as desired, then press [Check] to restore the
Check Screen to return to the checking steps.
When Bookmark has been checked on a subsequent screen, selecting the
application function key will jump to that screen. See p. 11-6 for details.
Do not press [Stop] or [Reset] to change the setting, or all the settings will
restore the initial condition.
If making a set or sample copy, proceed to step 5.
To start printing without proof copying, proceed to step 7.
4.
Release Application functions.
Touch the desired application function key on the Check Screen to highlight
it, then touch Release Setting.
The confirmation screen will appear on the Check Screen.
Touch Yes to cancel the function, or No to restore.
The following application functions can be released by touching Release
Setting: Program Job, No Image Area Erase, Neg. Pos. Reverse, Image
Centering, All-Image Area, Overlay.
If making a sample copy, proceed to the next step.
To start printing, proceed to step 7.
The image data can be corrected on a PC using PageScope Jobproofer. For
details, refer to the CD enclosed with bizhub PRO 1050/1050e copier main
body.
13-5