Konica Minolta bizhub pro 1050 User Manual page 229

Inserting Sheets and Covers (Sheet Insertion) (continued)
1.
Load regular sheets, insertion sheets and covers into any tray.
When using the Post inserter, load covers or insertion sheets into the Post
inserter tray.
• Be sure that the trays for copy paper, front/back cover, and insertions have
the same paper size loaded.
• Check the tray information on the Machine Status Screen or Copy Screen
and use the specified paper; otherwise machine trouble may occur.
• To use any other paper type/size than the specified paper, touch Paper
Presetting on the Copy Screen to change the setting temporarily.
2.
Touch Application on the Copy Screen.
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
3.
Touch Sheet Insertion on the Application popup menu.
The Sheet Insertion Screen will be displayed.
4.
Select the desired cover mode.
If no cover is desired, proceed to the next step.
11-9