Konica Minolta bizhub pro 1050 User Manual page 245

Inserting Images into Printed Sets (Image Insert) (continued)
3.
Use the control panel keypad to enter the page number.
Touch Set after each entry to move to the next key.
When setting more than 15 locations, touch the arrow key to move to the
next page.
To clear an incorrect entry, touch Delete. The entered page number will be
deleted.
For example, if insertion locations are [2/2/6], scanned images will be inserted
as follows:
The first scanned image will be inserted after page 2.
The second scanned image will be inserted directly after the first scanned
Image insertion.
The third scanned image will be inserted after page 6.
NOTES:
• When a page number is larger than the total original count, a sheet is
inserted as the last page.
• Insertions occur in sequence, even if page numbers are entered out of
sequence.
• Entering the same page number twice will insert two sheets at that
location.
Touch Booklet on the Image Insert Screen to use this function.
4.
When all page number entries are made, touch OK.
The Application popup menu will be restored.
To cancel the setting, touch Cancel.
To cancel the function without clearing the setting made, touch Function OFF.
5.
Touch OK on the Application popup menu.
The Copy Screen will be restored.
The Memory Scan key on the Copy Screen appears highlighted to show
that the Memory Scan mode is automatically selected.
6.
Enter the desired print quantity from the control panel keypad.
11-25